Skip to main content

Dalatecsupplies extruded thermoplastics extruded rod, tube and sheet

plastic granuales

Enhanced capabilities with Thermoplastic Extrusions of material and shapes!!!

Dalatec provides extruded thermoplastics from research and development of new materials to:

  • Thermoplastic prototype design!!!
  • Production and assembly!!!

Complete engineering of plastics, precision machining, custom fabrication and vacuum forming.

 

  • Natural Homopolymer Acetal (Delrin)
  • Black Homopolymer Acetal (Delrin)
  • Natural Copolymer Acetal
  • Black Copolymer Acetal
  • 13% PTFE Powder Filled Homopolymer Acetal (Delrin)
  • 13% PTFE Fiber Filled Homopolymer Acetal (Delrin)
  • Electrostatic Dissipative Copolymer Acetal
  • Natural Nylon Type 6/6
  • Black Nylon Type 6/6
  • MoS2 Filled Nylon Type 6/6
  • 30% Glass Filled Nylon Type 6/6
  • Kevlar Filled Nylon Type 6/6
  • Zytel ST-801 (Super Tough Nylon)
  • Natural Cast Nylon Type 6MoS2 filled Cast Nylon Type 6
  • Heat Stabilized Cast Nylon Type 6
  • Oil Filled Cast Nylon Type 6
  • 30% Glass Filled Cast Nylon Type 6
  • Natural Machine Grade Polycarbonate (PC)
  • Black Machine Grade Polycarbonate (PC)
  • 20% Glass filled Polycarbonate (PC)
  • Natural Polyethylene Terephthalate (PET)
  • Natural Polybutylene Terephthalate (PBT)
  • Lubricated Polybutylene Terephthalate (PBT)
  • Natural Polyvinylidine Fluoride (PVDF) (Kynar 740)
  • Natural Polyvinylidine Fluoride (PVDF) (Kynar 1010)
  • Natural Polyether-imide (PEI) (Ultem 1000)
  • Black Polyether-imide (PEI)
  • 30% Glass Filled Polyether-imide (PEI) (Ultem 2300)
  • Natural Polyphenylene Sulfide (PPS)
  • Natural Polyetheretherketone (PEEK)
  • Black Polyetheretherketone (PEEK)
  • 30% Glass Filled Polyetheretherketone (PEEK)
  • 30% Carbon Fiber Filled Polyetheretherketone (PEEK)
  • Bearing & Wear Grade Polyetheretherketone (PEEK)
  • Black Modified Polyphenylene Oxide (PPO) (Noryl EN265)
  • 30% Glass Filled Polyphenylene Oxide (PPO) (Noryl GFN3-780)

*A plastic material, which can be repeatedly melted-molded again and again by simple heating, is called a thermoplastic. Another name of thermoplastic material is thermoplastic polymer. Thermoplastics become soft and moldable on heating. They can then be recast in different shapes and cooled. On cooling the thermoplastic material hardens.  Thermoplastics usually contain additives to change the properties of the material such as polypropylene.

Thermoplastics Chart with specifications